Hammerite Metal Paint - Smooth Finish

Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. This is a brilliant gloss finish which will retain its sheen for years.

Key information

Coverage	Brush: 4.5 sq m per litre - 2 coats Aerosol: approx. 0.5 sq m per 400ml can
Touch dry	Dependent upon temperature / humidity
Recoatable	This is a 2 coating system. Ensure no more than 3 hours between coats. Final coat should be applied thick enough to flow to a gloss finish
Pack sizes	400ml aerosol, 0.25L, 0.5L, 0.75L, 1L, 2.5L & 5L
Location	Interior, Exterior
Application	Brush

Key benefits

Can be applied directly onto rusty metal.
No need for primer or undercoat.
Corrosion resistant.
Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside.

System information

For the best results makes sure all surfaces must be dry and free from dirt, dust, grease and salt.

After suitable preparation apply 1 or 2 coats of Hammerite Metal Paint.

After use, clean equipment with Hammerite Brush Cleaner and Thinners.

* colours only available in limited pack sizes.

Colour range

Black, Silver, Blue, Gold*, White, Dark Green, Red and Copper*

» See the colour range

Downloads

Literature

Hammerite Trade Colour Card

More information

Due to the unique formulation of Hammerite Metal Paint Finishes, brushes and painting equipment must be cleaned using Hammerite Brush Cleaner & Thinners.

On bare metal and shiny smooth surfaces, make sure the surfaces have been degreased with Hammerite Brush Cleaner & Thinners.

To ensure maximum adhesion on aluminium and non ferrous metal surfaces use Hammerite Special Metals Primer.