| Products & Datasheets >
Polycell Trade >
Fillers >
Polycell Trade Deep Hole Polyfilla |
 |
Polycell Trade Deep Hole Polyfilla |
A two part plaster based filler that fills deep holes up to 50mm and dries to a structurally sound repair in just 20 minutes. |
Key information
| Formulation |
Water Based |
| Touch dry |
20 minutes |
| Pack sizes |
2x500g |
| Location |
Interior, Exterior |
| Application |
Knife |
Key benefits
- Structural repair - drillable and accepts screws and nails
-
Fills holes up to 50mm deep in one application
-
No shrinking, cracking or sagging
-
Can be overpainted in 30 minutes*
-
Plaster based - smooth and easy to sand
System information
To get the best results make sure surfaces and cracks are free of loose material. Touch in nails and screw heads with a solvent-based paint.
Remove inner Part B from the main Part A container. Mix equal amounts of Parts A and B on a flat surface into a smooth even coloured paste. Do not prepare more than can be applied in 5-10 minutes, as this is the working life of the product. Press the filler into the repair with a filling knife and finish off by smoothing with a wet knife and leave to set. Sand down when fully dry and overpaint when used outside.
After use, clean tools in warm water and store unused product in the original containers, replacing the membrane and securing the lid firmly.
|
Downloads
  |
