| Products & Datasheets >
Hammerite >
Metal primers >
Hammerite Red Oxide Primer |
 |
Hammerite Red Oxide Primer |
Anti-corrosive rust-stabilising primer for rusty or bare iron and steel. |
Key information
| Formulation |
Solvent Based |
| Coverage |
12 sq m per litre |
| Touch dry |
Dependent upon temperature / humidity |
| Recoatable |
Brush: Allow at least 4 hours between coats |
| Pack sizes |
Tins: 250ml, 500ml, 2.5 ltrs and 5 ltrs. |
| Location |
Interior, Exterior |
| Application |
Brush, Roller |
Key benefits
- Anti corrosive rust stabiliser.
-
Creates a barrier to prevent further rust.
System information
For best results, ensure surface is dry and free from loose rust, millscale, paint, oil and grease. Degrease bare metal with Hammerite Brush Cleaner and Thinners.
Apply 1 or 2 coats, allowing minimum 4 hours between coats. Ensure corners and edges are well covered. Apply topcoat after minimum 4 hours.
After use, clean tools with Hammerite Brush Cleaners and Thinners.
Top Trade Tip
If using with a roller on large flat surfaces you may find it necessary to thin with Hammerite Brush Cleaners and Thinners up to maximum 9 parts paint to 1 part thinners. Do not use cellulose thinners or white spirit.
|
Downloads
  |
