| Products & Datasheets >
Hammerite >
Metal finishes >
Hammerite Quick Drying Radiator Enamel |
 |
Hammerite Quick Drying Radiator Enamel |
A heat resistant high gloss or satin finish for water-filled radiators and hot water pipes, with the added benefit of being quick-drying and low odour, minimising disruption to the home. |
Key information
| Coverage |
Brush: 14 sq m per litre per coat
Aerosol: 3 sq m per 400ml can |
| Touch dry |
Dependent upon temperature / humidity |
| Recoatable |
Brush: Allow 16 hours between coats
Aerosol: Allow 30 minutes between coats |
| Location |
Interior |
Key benefits
- Low odour and quick-drying.
-
Easy to use - air drying.
-
Water clean-up.
-
Heat resistant.
System information
For best results, make sure all surfaces must be clean, dry, and free from rust, flaking paint, dirt, dust and grease.
Apply 1 or 2 (over contrasting colours) coats directly to a painted surface. On bare metal 2 coats should be applied. Allow 12 hours between coats.
After use, clean equipment with soap and water.
|
Colour range
White (Satin or Gloss), Magnolia (Satin)
Downloads
  |
