| Products & Datasheets >
Hammerite >
Metal primers >
Hammerite No.1 Rust Beater |
 |
Hammerite No.1 Rust Beater |
Anti-corrosive rust-stabilising self-levelling primer for rust-pitted or bare iron and steel. |
Key information
| Formulation |
Solvent Based |
| Coverage |
Brush: 12 sq m per litre
Aerosol: Approx 1 sq m per 200ml can |
| Touch dry |
Dependent upon temperature / humidity |
| Recoatable |
Brush: Allow at least 4 hours between coats
Aerosol: Allow 15-30 minutes between coats |
| Pack sizes |
Tins: 250ml, 500ml, 1 ltr and 2.5 ltrs.
Aerosol: 200ml, 400ml. |
| Location |
Interior, Exterior |
| Application |
Brush, Roller, Aerosol |
Key benefits
- Rust stabiliser.
-
Creates barrier to prevent further rusting.
System information
To get the best results ensure surface is dry and free from loose rust millscale, paint, oil and grease. Degrease bare metal with Hammerite Brush Cleaner and Thinners.
Apply 1 or 2 coats, allowing minimum 4 hours between coats. Ensure corners and edges are well covered. Apply topcoat after minimum 4 hours.
After use, clean equipment with Hammerite Brush Cleaner and Thinners.
Top Trade Tip
If using with a roller on large flat surfaces you may find it necessary to thin with Hammerite Brush Cleaners and Thinners up to maximum 9 parts paint to 1 part thinners. Do not use cellulose thinners or white spirit.
|
Colour range
Dark Brown and Beige
Downloads
  |
