ICI Paints
Products & Datasheets > Dulux Trade > Woodcare > Dulux Trade Weathershield Naked Wood

Dulux Trade Weathershield Naked Wood

A high performance, water-based transparent exterior woodstain which produces a totally clear matt finish. Unique ICI Paints technology means that exterior joinery is not only protected from extreme weather for up to 4 years (when used in accordance with full system)**, but also the natural beauty of wood is maintained without the colour or texture being affected.

Key information

Formulation Water-based
Coverage 13m² per litre per coat; depending on the porosity of wood (normally 3 coats)
Touch dry 1 hour but dependent on temperature and humidity
Recoatable 4 hours
Pack sizes 2.5L, 5L
Thinning This product should not be thinned
Location Exterior
Application Brush, Roller, Conventional Spray

Key benefits

  • Prevents the wood from greying
  • Enhances the natural look of wood
  • Effective against cracking. warping and swelling
  • For use on new and bare wood
  • Suitable for both hardwoods and softwoods
  • Totally clear matt finish

System information

Innovative ICI Paints flexible polyurethane technology delivers a durable protective finish that outperforms conventional varnishes.

To get the best results surfaces must be sound, clean and dry before treating.

After suitable preparation apply 1 coat of Weathershield Naked Wood Basecoat. When fully fry, finish with 3 coats of Weathershield Naked Wood.

Weathershield Naked Wood System has been formulated to bring out the natural beauty of the wood whilst providing tough yet durable finish.

The Weathershield Naked Wood System will prevent wood greying for up to 4 years, on certain types of wood this may last even longer, provided that the instructions have been carefully followed. Although after significant exposure periods some red colours such as Western Red Cedar will show some fading of its natural colour.

After use, remove as much woodstain as possible from brushes before cleaning with clean water. Do not use or store in extremes of temperature and protect from frost.

Weathershield Multi-Surface Fungicidal Wash contains benzalkonium chloride. Dulux Trade Weathershield Naked Wood Basecoat contains iodopropynyl butyl carbamate and propiconazole. Use biocides safely. Always read the label and product information before use. ** Full system comprises of 1 coat of Weathershield Naked Wood Basecoat* followed by 3 coats of Weathershield Naked Wood. Performance may vary by wood type, please see data sheet 619 for details.

Colour range

Clear

Downloads

Download PDF datasheet 619 for Dulux Trade Weathershield Naked WoodDownload PDF safety datasheet SDS619 for Dulux Trade Weathershield Naked Wood

Literature

A Professional Guide to Protecting Wood
Download A Professional Guide to Protecting Wood
or

More information

Use Dulux Trade Weathershield Naked Wood Basecoat as the foundation for Weathershield Naked Wood.


Low VOC offering a more environmentally friendly finish.


Use Weathershield Multi-Surface Fungicidal Wash to remove and treat any mould, algae, lichen or moss.