| Products & Datasheets >
Dulux Trade >
Exteriors >
Dulux Trade Weathershield Exterior Preservative Primer + |
 |
Dulux Trade Weathershield Exterior Preservative Primer + |
Part 1 of a flexible weather-resistant, 3 part paint system developed to provide long lasting protection for exterior woodwork. Suitable for both new and previously painted exterior woodwork, it penetrates deep into the wood to guard against rot, sealing the grain to keep out water. |
Key information
| Formulation |
Solvent-based |
| Coverage |
Heavily dependent on the absorbency of the wood. Up to 25m² per litre may be given as a guide |
| Touch dry |
2 hours dependent upon temperature / humidity |
| Recoatable |
Normally either within 2 hours, or when fully dry, 16-24 hours. |
| Pack sizes |
1L, 2.5L, 5L |
| Thinning |
This product should not be thinned. |
| Location |
Exterior |
| Application |
Brush |
Key benefits
- Penetrates and seals new or bare exterior joinery and smooth planed wood.
-
Helps inhibit moisture intake at the end grain and joints.
-
Fungicides help deter disfiguring surface growths and wood rot.
System information
To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry.)
Apply 1 coat of the appropriate coloured Dulux Trade Weathershield Exterior Undercoat to all primed wood. Apply a second coat of Dulux Trade Weathershield Exterior Undercoat overall, followed by either 1 coat of Dulux Trade Weathershield Exterior High Gloss.
After use remove as much preservative as possible from brushes before cleaning with white spirit.
Top Trade Tip
Allow a minimum of 2 hours before overcoating Dulux Trade Weathershield Exterior Undercoat and 16 hours for Dulux Trade Weathershield Exterior High Gloss.
|
Colour range
Semi-transparent Blue/Green
Downloads
 
|