| Products & Datasheets >
Dulux Trade >
Woodcare >
Dulux Trade Quick Drying Wood Dye |
 |
Dulux Trade Quick Drying Wood Dye |
A quick-drying wood dye for the enhancement and decoration of all interior wood. |
Key information
| Formulation |
Water-based |
| Coverage |
Smooth wood: Up to 18m² / litre / coat |
| Touch dry |
30 mins dependent upon temperature / humidity |
| Recoatable |
1-2 hours |
| Pack sizes |
500ml |
| Thinning |
This product should not be thinned. |
| Location |
Interior |
Key benefits
- Ideal for use under Dulux Trade Diamond Glaze
-
For interior hardwoods, softwoods and plywood.
-
Resists fading & enhances the natural grain of the wood.
-
Low odour formula.
-
Touch dry in 30 minutes.
System information
Apply to bare wood only. Surfaces must be sound, clean and dry before treating. Completely remove all existing coatings and sand to a smooth finish.
Using a sponge or clean soft cloth, apply with a firm sweeping motion. Avoid overlap. Finish off in the direction of the grain to give an even colour. Two coats are normally sufficient for most wood. Allow to dry for 2 hours between coats. If deeper colour is required, apply further coats.
After use, remove as much wood dye as possible from equipment before cleaning with clean water.
|
Downloads
  |
