| Products & Datasheets >
Dulux Trade >
Specialist products >
Dulux Trade Metalshield Gloss Finish |
 |
Dulux Trade Metalshield Gloss Finish |
Specially formulated for metal, with a quick-drying solvent-based formulation that can be overcoated within 4-6 hours (depending upon conditions). |
Key information
| Formulation |
Solvent-based |
| Coverage |
13m² per litre |
| Touch dry |
1-2 hours dependent upon temperature / humidity |
| Recoatable |
4-6 hours |
| Pack sizes |
1L, 2.5L and 5L |
| Thinning |
Not usually required. |
| Location |
Interior, Exterior |
| Application |
Brush, Roller |
Key benefits
- Provides lasting protection against corrosion on metal substrates such as railings, garage doors, lift shafts, staircases and emergency exit routes.
-
Applying our straightforward, single-pack system: Metalshield Zinc Phosphate Primer from Dulux Trade + 2 coats of Metalshield Gloss Finish from Dulux Trade will deliver up to 8 years metal protection.
-
Suitable for ferrous and non ferrous metals
-
Straightforward primer/ finish system delivers up to 8 years protection.
-
Delivers best value by extending maintenance cycles
-
Quick drying times
System information
For best results, surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.
Apply 1 coat of the appropriate Metalshield primer from Dulux Trade followed by 2 coats of Metalshield Gloss Finish from Dulux Trade. Where a special process colour is to be used, or where a strong colour change is required, additional coats will be required.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
|
Colour range
Four ready-mixed colours: White, Black, Silver and Gold. Additionally Metalshield can be tinted in the BS4800 and RAL colour ranges together with approx. 1,500 Colour Palette colours including the entire Weathershield Exterior (Town & Country) fan deck / colour range.
» See the colour range
Downloads
  |
