Dulux Trade Light and Space Flat Matt

A revolutionary water-based matt finish that brings a brighter, more spacious feel to any room. Makes a room feel brighter and more spacious Uses up to 20%** less light energy Stylish, fashionable finish.

Key information

Formulation	Water-based
Pack sizes	5L

Application information

Coverage	Up to 17m² per litre
Touch dry	Dependent on temperature and humidity
Recoatable	2 - 4 hours
Thinning	Brush or roller application: For sealing new or bare surfaces, 1 part clean water to 5 parts paint. For normal use: Add up to 1 part clean water to 10 parts paint.
Application	Brush, Roller, Conventional Spray, Airless Spray

Key benefits

Reflects up to twice as much light around a room compared to our conventional emulsion paints*
Makes a room feel brighter and more spacious
Uses up to 20%** less light energy
Stylish, fashionable finish.

System information

Surfaces must be sound, clean and dry before painting (new surfaces particularly must be fully dry).

Seal new or bare surfaces with a thinned coat of Dulux Trade Flat Matt Light & Space (up to 1 part clean water to 5 parts paint.) The normal finishing process is 2 full coats of Dulux Trade Flat Matt Light & Space.

*The light reflectance value is always greater than our conventional emulsion paints with similar hue (colour family) and chroma (intensity of colour) but may not reflect twice as much light in every case, depending on the colour chosen. ** This figure is based on theoretical calculations on pairs of bare rooms of dimensions 4 x 3 x 2.4m where the light incident on all surfaces is averaged. The rooms all have the same mid-grey floor colour (LRV 50). They have a white ceiling and a colour on the walls. In one of each pair these are from the Light&Space range. In the other they are conventional products. The Light&Space and conventional colours have similar hue (colour family) and chroma (intensity of colour). The energy savings will not always equate to 20%. They will vary depending on the contents, dimensions and floor colour of the room and will differ if lighting in particular areas needs to be controlled. The calculated figure varies from 14% to 28% depending on the wall colour chosen. The actual light energy savings achieved in practice may differ from the calculations.

Colour range

Available in a unique range of 26 tinted colours and white

» See the colour range

Downloads