Hydrostrip 1003
A water-based stripper which removes decorative coatings from wood, masonry, brick and other porous surfaces.
-
Key information
- Formulation
- Water-based
- Pack sizes
- 3.78L and 18.9L
-
Application information
- Coverage
- 1-2.2m² per litre
- Touch dry
- Dependent upon temperature / humidity
- Recoatable
- Thinning
- This product should not be thinned.
- Application
-
Key benefits
- Also removes graffiti from bare walls, wood and concrete in all kind of commercial projects.
- Also ideal for removing multiple coats from any substrate.
- Effective water-based alternatives to methylene chloride strippers and grit blasting.
- Allows for the removal of decorative coatings from wood, masonry, brick and other porous substrates.
- Cost effective and less time consuming to apply.
-
System information
The product needs to be spray applied, using either airless or high volume low pressure spray.
Most paint systems will lift when the stripper has been applied for 1 to 6 hours, but to obtain optimum results, it is recommended to allow the stripper to work overnight prior to removal. When removing multiple layers of paint, it may be necessary to re-apply the product.
Once the paint residue has been removed, wash the surface thoroughly with water. The stripped surface is now suitable for re-painting with an appropriate Dulux Trade paint system.
After use, remove as much stripper as possible from equipment before cleaning with clean water.