| Products & Datasheets >
Dulux Trade >
Decorative finishes >
Dulux Trade Aquatech Undercoat |
 |
Dulux Trade Aquatech Undercoat |
A revolutionary alkyd emulsion undercoat for use on interior woodwork as well as heated surfaces like radiators, which is low odour and pleasant to apply. |
Key information
| Formulation |
Water-based |
| Coverage |
Up to 16m² per litre. |
| Touch dry |
Dependent upon temperature and humidity |
| Recoatable |
6 hours |
| Pack sizes |
1L, 2.5L and 5L (5L PBW only) |
| Thinning |
Thinning is not usually necessary unless using as a primer on bare wood, in which case add up to 1 part of clean water to 10 parts of paint. |
| Location |
Interior |
| Application |
Brush |
Key benefits
- Water-based quick-drying undercoat.
-
Recoatable in 6 hours.
-
Low odour.
-
Suitable for use on heated surfaces such as radiators and pipes.
-
Good opacity and flow out of brush marks.
System information
To get the best results make sure surfaces to be painted are sound, clean and dry. New surfaces particularly must be fully dry.
Apply 1 or 2 coats of Aquatech Undercoat as required, followed by 1 or 2 coats of Dulux Trade Aquatech Gloss. Where a strong colour change is involved, 2 coats will be required.
Newly painted doors and windows should not be closed (tightly) until the paint is fully dry.
After use, remove as much paint as possible from equipment before cleaning in a solution of warm water and detergent. For stubborn residues use Dulux Brush Cleaner and Renovator.
|
Downloads
  |
