| Products & Datasheets >
Dulux Trade >
Specialist products >
Dulux Trade Anti-Graffiti Clearcoat |
 |
Dulux Trade Anti-Graffiti Clearcoat |
A two pack, water-based coating for use on interior and exterior surfaces. It can be used over existing sound coatings or clean, dry and laitance free uncoated masonry surfaces. Dulux Trade Anti-Graffiti Clearcoat dries to a tough gloss finish that has good impact & abrasive properties, protecting areas that are prone to graffiti. |
Key information
| Formulation |
Water-based |
| Coverage |
Up to 8m² per litre |
| Touch dry |
6 hours at 20°C |
| Recoatable |
Minimum 16 hours, maximum 7 days. Hard dry after 16 hours. |
| Pack sizes |
5L when mixed (3.91L Base and 1.09L Activator) |
| Thinning |
Ready for use when mixed. If required add a maximum of 10% clean water to activated paint. |
| Location |
Interior, Exterior |
| Application |
Brush, Roller |
Key benefits
- Low odour.
-
Upgrades existing coatings or bare walls to have anti-graffiti properties.
System information
To get the best results with Dulux Trade Anti-Graffiti Clearcoat, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry), and free from any contaminants such as loose particles, dust or grease.
Apply 1 or 2 coats of Dulux Trade Anti-Graffiti Clearcoat to sound, clean surfaces.
After use, remove as much paint as possible from equipment before cleaning with clean water.
|
Downloads
  |
