| Products & Datasheets >
Cuprinol Trade >
Treatments and fillers >
Cuprinol Trade Wood Preserver Green (TG) |
 |
Cuprinol Trade Wood Preserver Green (TG) |
A general purpose coloured preservative for the protection of sound wood against rot and woodworm. |
Key information
| Formulation |
Solvent-based |
| Coverage |
Brush / Spray: (2-3 coats)
4-7m² / litre interior - for sound wood
4-7m² / litre exterior wood - above ground
Dipping:
for at least 3 minutes.
Immersion (whole timber process): Immerse timber for 10-60 minutes |
| Touch dry |
Dependent upon temperature / humidity |
| Recoatable |
Recoat before previous coat is dry |
| Pack sizes |
2.5L, 5L, 25L |
| Thinning |
This product should not be thinned. |
| Location |
Interior, Exterior |
| Application |
Brush, Conventional Spray |
Key benefits
- Deep penetrating.
-
Coloured to identify treated areas.
-
For horticultural and other structural timber.
-
Harmless to plants when dry.
-
Suitable for interior and exterior use.
System information
To get the best results wood should be clean, free from bark, dirt and any surface treatment such as paint or varnish.
Flood all surfaces, paying particular attention to end-grain and joints to ensure maximum protection. Apply two or three liberal coats before the previous coat is dry. The more preserver is used, the better is the protection achieved. One flooded spray coat is equivalent to one brush coat and should be applied using a low pressure, coarse (nonatomising) compression spray.
After use, remove as much product as possible from brushes etc, before cleaning with white spirit.
Top Trade Tip
Where wood is to be overpainted Wood Preserver Clear is recommended
|
Downloads
  |
