| Products & Datasheets >
Cuprinol Trade >
Treatments and fillers >
Cuprinol Trade Wood Preserver (T) |
 |
Cuprinol Trade Wood Preserver (T) |
A general purpose oak coloured preserver for the protection of sound wood against rot and woodworm. |
Key information
| Formulation |
Solvent-based |
| Coverage |
Brush / Spray: (2-3 coats)
4-8m² / litre interior - for sound wood
4-8m² / litre exterior wood - above ground |
| Touch dry |
Dependent upon temperature / humidity |
| Recoatable |
Recoat before previous coat is dry |
| Pack sizes |
2.5L, 5L, 25L |
| Thinning |
This product should not be thinned. |
| Location |
Interior, Exterior |
| Application |
Brush, Conventional Spray |
Key benefits
- Deep penetrating.
-
Can be varnished or polished when dry.
-
Harmless to plants when dry.
-
Suitable for interior and exterior use.
System information
To get the best results wood should be clean, free from bark, dirt and any surface treatment such as paint or varnish.
Flood all surfaces, paying particular attention to end-grain and joints to ensure maximum protection. Apply two or three liberal coats before the previous coat is dry. The more preserver is used, the better is the protection achieved. One flooded spray coat is equivalent to one brush coat and should be applied using a low pressure, coarse (non-atomising) compression spray.
After use, remove as much product as possible from brushes etc, before cleaning with white spirit.
|
Colour range
Light Oak/Dark Oak
Downloads
  |
