| Products & Datasheets >
Cuprinol Trade >
Interior woodcare >
Cuprinol Trade Quick Drying Varnish |
 |
Cuprinol Trade Quick Drying Varnish |
A general purpose water-based acrylic varnish for
protecting interior woodwork and cork. It is ideal for furniture, shelving, doors and skirting boards and is available in clear gloss, clear satin and a range of colours in satin finish. |
Key information
| Formulation |
Water-based |
| Coverage |
Smooth wood: 20m² per litre per coat (normally 3 coats on new / bare wood; 2 coats on varnished / sealed wood) |
| Touch dry |
30 mins dependent upon temperature / humidity |
| Recoatable |
2 hours |
| Pack sizes |
500ml, 1L, 2.5L |
| Thinning |
This product should not be thinned. |
| Location |
Interior |
| Application |
Brush |
Key benefits
- For interior wood, cork and veneer.
-
Rapid job completion: minimal disruption.
-
Resistant to wear, heat, moisture and most household chemicals.
-
Suitable for interior use only.
System information
To get the best results make sure the surfaces to be painted are sound, clean and dry. (New surfaces particularly must be fully dry.)
Use a good quality bristle brush to evenly apply 2-3 coats, using light brush strokes in the same direction along the grain and keeping a wet edge, avoiding overlaps. Avoid vigorous brushing or brushing partially dried areas. Allow the varnish to dry thoroughly then lightly sand and remove dust before applying the next coat.
After use, remove as much product as possible from brushes etc, before cleaning with white spirit.
|
Downloads
  |
