Cuprinol Trade Polyurethane Varnish

A high build one-part clear polyurethane varnish for protecting interior wood, cork, chipboard and veneer. It is specially formulated to resist abrasion, heat, moisture, alcohol and most household chemicals.

Key information

Formulation	Solvent-based
Coverage	Smooth wood: 15m² per litre per coat (normally 3 coats on new / bare wood; 2 coats on varnished / sealed wood)
Touch dry	4-6 hours dependent upon temperature / humidity
Recoatable	16 hours
Pack sizes	1L, 2.5L, 5L*
Thinning	This product should not be thinned.
Location	Interior
Application	Brush

Key benefits

Tough and durable.
Resists scratches, heat and alcohol.
Can be used on bare or previously varnished surfaces, or over wood dye.
Suitable for interior use only.

System information

To get the best results make sure the surfaces to be painted are sound, clean and dry. (New surfaces particularly must be fully dry.)

Use a good quality bristle brush to evenly apply 2-3 coats, using light brush strokes in the same direction

ong the grain and keeping a wet edge, avoiding overlaps. Avoid vigorous brushing or brushing partially dried areas. Allow the varnish to dry thoroughly then lightly sand and remove dust before applying the next coat.

After use, remove as much product as possible from brushes etc, before cleaning with white spirit.

*Clear Gloss only

Colour range

Clear Matt, Clear Gloss, Clear Satin

Downloads