| Products & Datasheets >
Cuprinol Trade >
Interior woodcare >
Cuprinol Trade Original Bourne™ Seal |
 |
Cuprinol Trade Original Bourne™ Seal |
A tough slip-resistant clear gloss finish for interior wood and unsealed cork floors. It is also suitable for sealing interior concrete floors. |
Key information
| Formulation |
Solvent-based |
| Coverage |
Smooth wood: 12m² per litre per coat (normally 2-3 coats on new / bare wood); 1-2 coats on varnished / sealed wood)
Concrete: 8m² per litre per coat (normally 2-3 coats) |
| Touch dry |
8 hours dependent upon temperature / humidity |
| Recoatable |
16 hours |
| Pack sizes |
1L, 2.5L, 5L |
| Thinning |
This product should not be thinned. |
| Location |
Interior |
| Application |
Brush |
Key benefits
- For interior wood, cork and concrete flooring.
-
Slip resistant.
-
Hard wearing and resists petrol, hydrocarbons and water solutions.
-
Suitable for interior use only.
System information
To get the best results make sure the surfaces to be painted are sound, clean and dry. (New surfaces particularly must be fully dry.)
Apply 2-3 coats of Original Bourne™ Seal depending on conditions.
After use, remove as much product as possible from brushes etc, before cleaning with white spirit.
|
Downloads
  |
