| Products & Datasheets >
Cuprinol Trade >
Landscape and Garden >
Cuprinol Trade Landscape & Decking Oil |
 |
Cuprinol Trade Landscape & Decking Oil |
A water-based blend of resins and oils that helps to replace the natural ingredients lost through weathering. Provides a light and natural looking finish on all landscape timber. |
Key information
| Formulation |
Water-based |
| Coverage |
20m² per litre per coat (normally 2 coats). However absorbent wood and grooved decking will significantly decrease coverage. |
| Touch dry |
2 to 4 hours in good conditions. Avoid heavy traffic on decking until thoroughly dry (2-3 days). |
| Recoatable |
4-6 hours in good conditions |
| Pack sizes |
2.5L, 5L |
| Thinning |
This product should not be thinned. |
| Location |
Exterior |
| Application |
Brush, Conventional Spray |
Key benefits
- Ideal for use on decking
-
Enhances the appearance of wood
-
Provides a long lasting finish
-
Colours and revitalises the wood
-
Safe for use near plants
-
Quick drying – time saving formulation
System information
To get the best results ensure the surfaces are clean and free from any surface coating, mould or algae.
For best results on decking, brush to remove dirt and debris and then clean the surface with Cuprinol Decking Cleaner*, rinse well and allow to dry.
Timber previously treated with oil must be allowed to weather for minimum 6 months before treating.
After suitable preparation apply up to 3 coats of Cuprinol Trade Landscape & Decking Oil on bare wood, depending on the depth of colour required.
Shake container thoroughly before and during use.
After use, remove as much product as possible from brushes before cleaning with clean water. Do not use or store in extremes of temperature and protect from frost.
|
Colour range
6 ready-mixed colours: Rustic Walnut, Rich Brown, Dark Oak, Autumn Cedar, Moorland Green and Black
» See the colour range
Downloads
  |
