| Products & Datasheets >
Cuprinol Trade >
Treatments and fillers >
Cuprinol Trade Damp Seal |
 |
Cuprinol Trade Damp Seal |
Specially formulated to seal patches* of penetrating
damp on interior walls and ceilings, preventing them from showing through and spoiling decorations. Can be used on plaster, cement and stone. It has a matt white finish that can be over-painted or wallpapered if required. |
Key information
| Formulation |
Solvent-based |
| Coverage |
6m²/l coat (apply 2 coats) |
| Touch dry |
4-6 hours dependent upon temperature / humidity |
| Recoatable |
12-16 hours |
| Pack sizes |
1L and 2.5L |
| Thinning |
Do not thin this product. |
| Location |
Interior |
| Application |
Brush |
Key benefits
- Low odour formulation makes it pleasant to use.
-
Can be used on plaster, cement and stone.
System information
Thoroughly clean and repair surface, including the source of the dampness. Remove any wallpaper and loose paint. Smooth down high spots on the surface. Can be applied to damp but not saturated surfaces. Allow new plaster to dry for 7 -10 days before using this product. Since the product seals the surface, the drying of wallcoverings, especially vinyl coverings, may be slowed.
Apply generously by brush working in well over the affected area and a wide surrounding area. Avoid runs and splashing on polystyrene tiles or any plastic materials. Allow to dry overnight before applying a second generous coat and before decorating.
After use, remove as much product as possible from brushes before cleaning with white spirit.
|
Downloads
  |
